Monitoring systems for commercial, construction and rail vehicles
Blaser-mobile-IoT includes integrated “Sensor-to-Cloud” solutions for industry, commerce and private use. We understand our products as “open data” and provide you with your data intelligently filtered and processed via our platform or as a data stream to implement in your existing CRM system. Our applications and devices are not stand-alone solutions, but are a modular component of your system.
Depending on the application, we use the following communication technologies:
- LAN, WLAN, GSM, Bluetooth, FMS-CAN-Bus
- The connection between the device and server is bidirectional
The following data is transmitted in the current applications:
- Location data
- Condition data, ignition and acceleration
- Speed data & distance travelled
- Environmental data such as temperatures, humidity and air pressure
- Alarms, battery voltage and interior movements
- Maintenance intervals, operating hours, operating times
Control of peripheral devices on the vehicle
Devices can be controlled via potential-free switching contacts. Control of door locks, cooling units, sirens, locks and switching loads on or off is therefore easy to manage.
Compatibility list
| Module / Data transmission | Item no. | K99.BIOT.BAS Core module | K99.BIOT.GND Core module incl. peripheral interface: |
| Standard data transmission | K99.BIOT.DAT | ✓ | |
| Security data transmission | K99.BIOT.DAL | ✓ | |
| Acceleration measurement | K99.BIOT.MBE | ✓ | ✓ |
| Driving behaviour | K99.BIOT.MFA | ✓ | ✓ |
| Speed, distances | K99.BIOT.MGE | ✓ | ✓ |
| Geofencing | K99.BIOT.MGP | ✓ | ✓ |
| Alarm signalling | K99.BIOT.MAL | ✓ | |
| Battery status | K99.BIOT.MBA | ✓ | |
| Operating hours, working hours and rest periods | K99.BIOT.MBS | ✓ | |
| DGPS correction signal | K99.BIOT.MDG | ✓ | |
| Load compartment monitoring | K99.BIOT.MLA | ✓ | |
| Environmental data | K99.BIOT.MUM | ✓ | |
| Contactless key | K99.BIOT.MRF | ✓ | ✓ |
Costs
Initial costs
| K99.BIOT.BEE | On-site meeting: discussion of the installation and measuring of the mounting plate, at cost |
| K99.BIOT.INI | Setup and parameterization platform: one-time per customer, flat rate |
| K99.BIOT.IBE | Commissioning and training: on a paid basis |
Annual costs
| K99.BIOT.DAT | Standard data transmission, data processing and server use: – Incl. use of the web platform – Alerting by e-mail and push messages free of charge – Alerting via e-call and SMS subject to a charge separate billing annually |
| K99.BIOT.DAL | Security data transmission, data processing and server use: – Incl. use of the web platform – Alerting via e-mail and push messages free of charge – Alerting by e-call and SMS 4 per month incl. others subject to charge, separate invoicing annually |
Basic equipment
| K99.BIOT.BAS | Blaser-mobile-IoT core module: housing, modem, antenna, parameterisation via the platform or as “open data” |
| K99.BIOT.GND | Blaser-mobile-IoT core module incl. peripheral interface: housing, individual mounting plate, modem, antenna, backup battery, interface card for connecting the individual additional modules. Parameterization via the platform or as “open data” |
Configuration modifications or customer-specific programming are possible and will be charged at CHF 120.00 / hour.
Individual modules
| K99.BIOT.MBE | Acceleration measurement module: Acceleration measurement for the detection of movements or abnormal vibrations on the vehicle |
| K99.BIOT.MFA | Driving behaviour module: Detection and evaluation of driving behaviour |
| K99.BIOT.MGE | Speed, distances module: Recording and evaluation of the routes completed |
| K99.BIOT.MGP | Geofencing module: Vehicle localisation and position evaluation, e.g. notification when entering a geo-zone or alerting when leaving a geo-zone |
| K99.BIOT.MAL | Alarm signalling module: 110DB alarm signal, built into the housing of the basic module, alarm signal via e-mail, telephone call, SMS, push message |
| K99.BIOT.MBA | Battery status module: Recording and evaluation of ignition status and battery voltages, alarm in case of interruption or battery discharge |
| K99.BIOT.MBS | Operating hours, working and rest times module: Detection and evaluation of driving hours, idle times, operating hours of additional equipment |
| K99.BIOT.MDG | Module DGPS correction signal: Differential Global Positioning System for precise vehicle localisation +/- 1m (excl. DGPS reference antenna) |
| K99.BIOT.MLA | Load compartment monitoring module: 2 wireless motion detectors incl. receiver for detecting movements in the load compartment |
| K99.BIOT.MUM | Environmental data module: Acquisition and evaluation of temperature |
| K99.BIOT.MRF | Contactless key module for triggering functions: e.g. muting the alarm sound on site or releasing doors |